First of all, I mean, you do not need the best tools to build your own boat, try to find used tools, flea markets and similar instruments that have just entered well. Even if I call you when you can buy the best when it is really necessary.
1 Table Saw: 10 inch cabinet saw, not one of those little saws that are set on a table, looked again to find a second hand, from 2 to 5 HP and a simple fence is more than enough. until the blade can be square and the fence canadapted true. Rust can be neglected and belts can be replaced. One thing to spend money here is the blade, carbide teeth 50-60 spend $ 50.00 to $ 70.00. Would you like two blades Blade $ 50.00 to $ 100.00. A blade sharpener can be seen on or are willing to go to the sharpener. Point is a sharp knife cheap dull blade is much better than $ 150.00.
2 Jointer: an indispensable tool, but do not need a $ 2000.00 24-inch model, a 13-inch in-store at home is beautifulfor $ 300.00.
If you find a shop very carefully used, could cost up to three new knife on some machines more than a new car. also check for a used car from a lot of pieces and check for square and cut quality. ill-treated by using a plane could get used to not always right. so beware.
Router 3: 1 1 / 2 to 2 HP to find a good used, if it has not been allowed to fall a lot and came around a good router takes a long time, two things with a brush before, the lookcan still be purchased and modified slightly and two Collete is a 1 / 4 and 1 / 2 inch. a router that is only from 1 / 4 Collete of very limited use. when a new router is of good quality can be purchased for $ 100.00 and you really do not need a router (but beautiful).
4 Band saw: do not spend much. almost all, because again and do not throw the blade is in order. 14 inches is large enough shovels and 3-4 3 / 4 to 8 teeth per inch in August
Want to do. use of a saw, make sure that the tableregular course and remain so.
5 Various small tools: a drill engine drill will be at least hundreds if not thousands of holes, but only rarely need the 1 / 2 food and great power, but these are difficult to penetrate. a battery drill is nice, 18-volt nothing less, and have a couple of spare batteries. Jigsaw and finishing Sanders, almost all do, but the best your budget allows. a good random Sander obit is a must, sticky-back Velcro, I have used both andYou have no favorites.
4x24 belt sander to get (size belt), cost more, but trust me on this.
6 Terminals: The more the better of all kinds, but again I used really good and expensive terminals cheapies Harbor Freight cheapies brochures in all forms and types of purchase, when you need it, our business is hundreds and sometimes I still empty.
7 A list of non-essential, but still nice, instruments: 10-inch cutting saw (Saw) router table (build yourwork) as a table design.
Shop Vac (tons sawdust is produced) makes it easy to clean plus you can rig almost any shop vac rough in a dust collector. Air compressor, larger is better to have used a new. I have never used a compressed air tools in the shop boat as a compressor large enough to be so expensive. Blowing chips (sawdust and out of my hair and back), I think to use.
That's all for now. I'll see you at the store the boat, now working on itBoat.
|
Price : $197.98
