One of the most important parts of working in the fields of engineering, manufacturing, and landscaping is an accurate measurement. You can measure spaces and objects in the visible and flat surfaces by using relatively simple tools like measuring tape. However, if you are going to measure depths like the depth of water and the depth of a tread on the car tire, it is required special tools. At this time, this article is going to give you important information about depth measuring tools. Just take a look at the information below.
There are basic tools that you can use for measuring basic depth of things like shallow water and swimming pools. These tools are graduated metal rods and meter sticks. If you want to measure the depth of open container, basic tools that can be used are measuring tape or ruler. Actually, these basic tools would be sufficient to support the depth measurement applications that needed around the house.
The next deep measuring tool that can be used for making the exact depth measurements of slots, crevices, and holes at a very small scale is called depth micrometer. This is an ideal tool that can also be used to measure things like the drill holes, metal recesses, and the depth of tire treads which must be a specific depth. This depth micrometer is designed with measuring rods which are sunk into the slots or holes to be measured. This tool can be fit with the rods of different lengths for measuring recesses of various depths.
Another depth measuring tool which is almost similar to a standard micrometer is called thread micrometer. This thread micrometer is commonly used for measuring the depth of threading on certain parts like rods and screws. The rod that used for the measurements on this thread micrometer can end in a point so you can appropriately measure the depth of threading.
